Quarry Crusher

High-frequency Screen

Learn More Products

High-frequency Screen
High-frequency Screen

Compared with the commonly screening and grading equipments, the High-frequency screen adopts higher frequency. As a result, it is able to damage tension force of the pulp surface. Also the fine particles are able to oscillate speedily on the surface of the screen because of the high frequency, and the big expecting minerals are isolated from the pulp easily.

We're here to help:

Welcome ! If you have any questions or suggestions about our products and services, please feel free to tell us anytime! Our operators will help your through the live chat or email. If the operators are all busy and you can't get response for a long time, you can contact us by phone or email.
Phone number: +86-21-58386189, 58386176
E-mail: [email protected]

Technical Data

Model Screen Surface Area (m2) Screening Concentration (%) Capacity (t/h) Power(kw)
ZGPS-4 4.5 30%-40% 15-25 0.72
ZGPS-5 5.2 30%-40% 20-30 1.1
ZGPS-6 6 30%-40% 24-36 1.5
ZGPS-8 8.1 30%-40% 32-48 2.2

High Frequency Screen Introduction

So that it produces good shape and helps make the materials more compact compared to output granularity especially the large-density materials and pulp cope with the sieve pore together.

Kinds of Mineral High Frequency Screen

You will find generally three kinds of mechanical screening equipment that create segregation. These kinds derive from the motion from the machine through its motor drive.

Circle-throw Vibrating Equipment - This kind of equipment comes with an eccentric shaft that triggers the frame from the shaker to lurch in a given position. This lurching action literally throws the fabric forward or more. Because the machine returns to the base condition, the fabric falls by gravity to physically lower level. This kind of screening devices are used and in mining procedures for big material with dimensions that vary from six inches to 20 mesh.

High frequency vibrating equipment - This kind of equipment drives the screen cloth only. Unlike over the frame from the devices are fixed and just the screen vibrates. However, these treadmills are like the above within the aspect it still throws material from it and enables the contaminants to cascade lower the screen cloth. These screens are suitable for dimensions more compact than 1/8 inch to 150 mesh.

Gyratory equipment - This kind of equipment is different from the above mentioned two within the aspect the machine gyrates inside a circular motion in a near level plane at low angles. The drive is definitely an eccentric gear box or eccentric weights.

Circle-throw Vibrating Equipment

Circle-throw Vibrating Devices are a shaker or a number of shakers regarding in which the drive causes the entire structure to maneuver. The dwelling stretches to some maximum throw or length after which contracts to some base condition. A design of springs sit underneath the structure where there's vibration and impact moderation because the structure returns towards the base condition.

This kind of devices are employed for large contaminants, dimensions that vary from pebble size on as much as boulder size material. It's also created for high volume output. Like a scalper, this shaker allows oversize material to pass through over then climb into a crusher this type of cone crusher, jaw crusher, or hammer crusher. The fabric that passes the screen by-passes the crusher and it is communicated and combined with crush material.

Also these treadmills are utilized in washing processes, as material passes under spray bars, finer material and foreign materials are cleaned with the screen. This really is an example of wet screening.

High Frequency Vibrating Equipment

High Frequency Vibrating Devices are a shaker whose frame is bound and also the drive vibrates just the screen cloth. High frequency vibration devices are for contaminants which are within this particle size selection of singleOr8 in (3 mm) lower to some 150 mesh.

These shakers usually create a secondary cut for more processing or create a end product cut.

These shakers are often set in a steep position in accordance with the horizontal level plane. Angles vary from 25 to 45 levels in accordance with the horizontal level plane.

Related Products: